Not exactly matching, but you might find helpful
Verifications
CBFEM Weld Model: Validation and Verification
Verification Comparison to EN 1993-1-8 The presented model for CBFEM is verified on a fillet weld in a lap joint and weld to unstiffened flange with analytical Figure 3: Configurations for sensitivity study, with a transverse weld, with a longitudinal weld and combination of both (not shown) Figure 4: Verification 5: Studied fillet weld connections of a flexible plate to a) an unstiffened column flange of open section and b) an unstiffened box section Figure 6: Verification
Steel
National code
AISC (USA)
CISC (Canada)
EN (Eurocode)
Application
Connection
Steel Topics
Welds
CBFEM
Verifications
Verification of IDEA StatiCa calculations for steel connection design (AISC)
Six additional models were developed for verification purposes by modifying the parameters based on the available test specimens. Measured experimental response was available for the connection specimens selected for verification purposes in this study.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Bolts
Plates
Rotational stiffness
Welds
Verifications
Verification study: Shear connections with coped beams (AISC)
Denavit and Rick Mulholland prepared this verification example in a joint project of The University of Tennessee and IDEA StatiCa.
Steel
Application
Connection
Steel Topics
Buckling
Verifications
Circular hollow sections
The chapter is focused on verification of connections of circular hollow sections. Outside the range of validity of FMM, an experiment should be prepared for validation or verification performed for verification according to a validated Fig. 7.1.7 Verification of CBFEM to FMM for the uniplanar CHS T and Y-joint Benchmark example Inputs Chord Steel S355 Section CHS219.1/6,3 Brace Steel
Steel
National code
EN (Eurocode)
Steel Topics
CBFEM
Welds
Verification book
Application
Connection
Verifications
Rectangular hollow sections
The chapter is focused on verification of joints of rectangular hollow sections. Outside the range of validity of FMM, an experiment should be prepared for validation or verification performed for verification according to a validated Fig. 7.2.3 Verification of resistance determined by CBFEM to FMM for the uniplanar SHS T and Y-joint Benchmark example Inputs Chord Steel S275 Section
Steel
National code
EN (Eurocode)
Steel Topics
CBFEM
Welds
Application
Connection
Verifications
Plate to circular hollow section
The chapter is focused on verification of connection of plate to circular hollow section. Outside the range of validity of FMM, an experiment should be prepared for validation or verification performed for verification according to a validated Tab. 7.3.5 Verification of prediction of resistances by CBFEM on FMM Example FMM Mode of failure CBFEM Mode of failure diff.
Steel
National code
EN (Eurocode)
Steel Topics
CBFEM
Welds
Application
Connection
Verifications
Fire design: Bolted lap joint
The object of this study is verification of component-based finite element method (CBFEM) of a bolted lap joint in fire with analytical model in Eurocode The design bearing resistance of bolts in fire should be determined from: Verification of resistance Design resistances calculated by CBFEM were compared Fig. 6 Benchmark example of the bolted splices in shear For other verification studies, visit our Support Center - Verifications .
Steel
Steel Topics
Bolts
Concrete Topics
Fire resistance
Application
Connection
Verifications
Fatigue life by nominal stress method
In this article, verification examples are presented for the Fatigue analysis type in IDEA StatiCa Connection. Verification The numerical calculation CBFEM is verified on analytical and numerical FEM models according to the stress range and fatigue endurance; see Verification The numerical calculation CBFEM is verified on analytical and numerical FEM models according to the stress range and fatigue endurance, see
Steel
Application
Connection
National code
EN (Eurocode)
Concrete Topics
Fatigue
Verifications
Multi level member and connection design
This article describes the advanced design of joints and their validation and verification is shown. This contribution shows the advanced design of joints and their Validation and Verification and how the member design including joints will be treated
Steel
Application
Connection
Member
National code
EN (Eurocode)
Verifications
Compressed Stiffeners in Structural Connections
It is proposed to use the reduced stress method for verification of gusset plate and haunch. The verification shows good results and will be validated on planned experiments of stiffeners with
different types of support.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Buckling
Stiffness
EN (Eurocode)
Verifications
Bolts and Compressed Plates Modelling
The verification example shows that compressed plates could be in finite element models designed without applying imperfections. An essential part of the following research is verification of the buckling curve for non-regular plate shapes such as triangular.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
CBFEM
Bolts
Buckling
EN (Eurocode)
Verifications
Design of stiffeners in structural steel joints
The verification is shown on an example of a web stiffener in the welded portal frame joint. The verification is shown on an example of a web stiffener in the welded portal frame joint.
Steel
Application
Connection
Steel Topics
Buckling
CBFEM
Verifications
Simple and Advanced Models for Connection Design in Steel Structures
The internal part of the design procedure is validation and verification including its hierarchy. The internal part of this design procedure is validation and verification including its hierarchy.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
CBFEM
EN (Eurocode)
Verifications
Chevron Brace Connection in a braced frame (AISC)
This is a second verification example from a series of brace connections. This verification example was prepared by Mahamid Mustafa in a joint project of The University of Illinois in Chicago and IDEA StatiCa. Verification of resistance The example uses the sections and dimensions shown in Figure 1 and as follows. Braces are HSS8x8x1/2 (ASTM A500 Gr.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Welds
Verifications
Fire design: Welded lap joint
Verification Tab. 1: Transverse fillet welds Transverse fillet welds Parametric study of temperature for transverse weld Fig. 2: Parametric study of temperature Design resistance in tension F Rd = 48 kN Benchmark example for the welded lap joint Fig. 8: Benchmark example for the welded lap joint For other verification
Steel
Concrete Topics
Fire resistance
Steel Topics
Welds
Verifications
Brace Connection at beam-column connection in a braced frame (AISC)
This is a third verification example from a series of brace connections. This verification example was prepared by Mahamid Mustafa in a joint project of The University of Illinois in Chicago and IDEA StatiCa. Verification of resistance The example uses the sections and dimensions shown in Figures 1 and 2 and as follows.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Bolts
Welds
Verifications
Brace Connection at beam-column connection in a braced frame – Double Angle Brace (AISC)
This is the first verification example from a series of brace connections. This verification example was prepared by Mahamid Mustafa in a joint project of The University of Illinois in Chicago and IDEA StatiCa. Verification of resistance The example used uses the sections and dimensions shown in Figure 1 and are as follows.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Bolts
Verifications
Cap plate connection of CHS profile (AISC)
A verification example of a cap plate connection of CHS profile is shown in the attached document.
Steel
National code
AISC (USA)
Steel Topics
Bolts
Plates
Application
Connection
Verifications
Flush moment end plate connections (AISC)
In the attached verification example, a flush moment end plate connection is designed according to Design Guide 16, so that no prying actions are present
Steel
National code
AISC (USA)
Steel Topics
Bolts
Welds
Application
Connection
Verifications
Splice connections of I-beam flanges (AISC)
In the attached verification example, a splice connection of I-beam flanges is being designed and investigated according to AISC 360-10.
Steel
National code
AISC (USA)
Steel Topics
Bolts
Application
Connection
Verifications
Single plate shear connection (AISC)
In the attached verification document, a single plate shear connection is being designed and investigated according to AISC 360-10.
Steel
National code
AISC (USA)
Steel Topics
Bolts
Plates
Welds
Application
Connection
Verifications
Welded Unreinforced Flange-Welded Web (WUF-W) Prequalified Connection - AISC
This verification example was prepared in a joint project between Ohio State University and IDEA StatiCa. Introduction The third prequalified connection covered in this verification study is welded unreinforced flange-welded web (WUF-W) moment connection. Among 11 tested connections, six of them were chosen to be covered in this verification study.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Capacity design
Seismicity
Verifications
Benchmark study of a bolted flange plate moment connection (AISC)
This study performed at the University of Chile presents the results of the verification of a Bolted Flange Plate (BFP) fully restrained moment connection
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Welds
Verifications
All welded double-angle connection (AISC)
This verification example takes a connection from AISC Design examples (Version 14.2, revised in April 2016) and compares the results with values obtained
Steel
National code
AISC (USA)
Steel Topics
CBFEM
Welds
Application
Connection
Verifications
Welded splice connection (AISC)
Base metal strength does not have to be evaluated in case of use of matching electrodes but it is shown here for verification.
Steel
National code
AISC (USA)
Steel Topics
CBFEM
Welds
Application
Connection
Verifications
Fatigue analysis – Butt welds of I section
This verification example shows the basics of fatigue analysis in the IDEA StatiCa Connection application.
Steel
Application
Connection
National code
AISC (USA)
Steel Topics
Welds
Concrete Topics
Fatigue
EN (Eurocode)
Verifications
Bracket Plate Connections (AISC)
This verification example was prepared by Mark D.
Steel
Application
Connection
Steel Topics
Bolts
Moment Connection
Welds
National code
AISC (USA)
Verifications
T-stub connections (AISC)
This verification example was prepared by Mark D.
Steel
Application
Connection
Steel Topics
Bolts
Plates
National code
AISC (USA)
Verifications
Beam-over-column Connections (AISC)
This verification example was prepared by Mark D.
Steel
Application
Connection
Steel Topics
Buckling
Plates
National code
AISC (USA)
Verifications
Bolted Wide Flange Splice Connections (AISC)
This verification example was prepared by Mark D.
Steel
Application
Connection
Steel Topics
Bolts
National code
AISC (USA)