Zu viele Suchergebnisse, bitte Suchbegriff angeben
Tutorial
Structural design of composite concrete section in RCS (EN)
Select the Prestressed section design . same tendon area, adjust the material properties of the tendon as indicated in the table below. material properties modification 5 Desing Member In Design Internal forces - 60days For the construction stage End of the design working life, change the Current Extreme to Stage 36500 and perform the same steps
Beton
RCS
EN (Eurocode)
Prestressed members
midas Civil + Gen
Tutorial
Autodesk Revit BIM link for connection design (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between Autodesk Select the New option with project type Steel and design code USA/ASD (AISC 360-16) . Then select Create project . The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Stahl
Connection
Checkbot
Revit
AISC (USA)
Tutorial
SAP2000 BIM link for the structural design of a steel connection (EN)
That completes the design of the connection for the column base plate with a diagonal brace. In this case, the anchors fail because of their low design capacity. We must optimize the design to find the passing solution.
Stahl
Connection
Checkbot
BIM link
SAP2000
EN (Eurocode)
Tutorial
AxisVM BIM link for structural concrete beam design (EN)
By following it step-by-step, you will learn how to activate and use the link between AxisVM and IDEA StatiCa Beam to easily design, reinforce and code-check We add all variable load cases which are assigned to LG2 (load group 2) to stage End of design working life . All load cases from this group will be added to ULS and SLS combinations. 6 Tendon design We activate all Construction Stages and run Tendon design to
Beton
EN (Eurocode)
AxisVM
Beam
Tutorial
Space Gass BIM link for the structural design of a steel connection (AS)
You can find it in the top ribbon under Design -gt; IDEA StatiCa Checkbot. In this case, the anchors fail because of their low design capacity. We must optimize the design to find the passing solution.
Stahl
Connection
Checkbot
BIM link
EN (Eurocode)
Tutorial
ETABS BIM link for steel Member design (AISC)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between ETABS and IDEA StatiCa Select the New option with project type Steel and design code AISC LRFD 360-22 . Then select Create Project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Stahl
Checkbot
Member
AISC (USA)
ETABS
GMNA
MNA
Tutorial
Autodesk Robot Structural Analysis Professional BIM link for steel member design (EN)
Design There are two ways we can design the member and its connections: Online - live within Checkbot maintaining a link to the FEA application Offline However, be mindful that some changes might result in an invalid design and as such these changes should undergo a thorough design review process. You can check and adjust the design, recalculate and code-check the member , save and close it.
Stahl
Member
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
Design of Precast Concrete using User-defined Cross-section in IDEA StatiCa
When prioritizing building aesthetics, engineers often design irregular structures like precast façades and curtain walls, but commonly used software doesn't Learn how to design and code-check this type of condition with a breeze in IDEA StatiCa using the RCS application. Design and Code-check Now that we’re done with modelling the reinforcement, we’re now ready to run the calculation.
Beton
RCS
EN (Eurocode)
DXF
Reinforcement
v24.0
Tutorial
Robot Structural Analysis BIM link for steel connection design (AISC)
Select the New option with project type Steel and design code USA - Subcode LRFD (AISC 360-16) . Then select Create project . From the Design tab in the Connection label N3, ensure that LRFD 2022 is being used. The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Stahl
Connection
AISC (USA)
Robot Structural Analysis
Checkbot
Tutorial
Tekla Structural Designer BIM link for connection design (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between Tekla Structural The Checkbot project will be updated, connection design is preserved, but the results will be invalidated. If the connections do not give the desired results, then you can open them again to optimize the design (i.e. strengthen if they fail the code-check or
Stahl
Connection
Checkbot
EN (Eurocode)
Tekla Structural Designer
Tutorial
AxisVM BIM link for steel Member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between AxisVM and IDEA Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Stahl
Member
EN (Eurocode)
AxisVM
GMNA
MNA
Tutorial
Tutorial for Midas Civil BIM link for concrete design
You can sort the design members into groups. It's suitable from the design point of view. The envelopes are included in the other combinations with permanent load cases. 4 Design In the Data card are predefined significant code -checks
Beton
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
ACI (USA)
Tutorial
Structural design of a steel beam (AISC)
Learn how to use IDEA StatiCa Member to design and code-check a simply supported steel beam. To design the second supported joint, click on Connections CON2 and then Apply the recent connection CON1.
Stahl
Member
Buckling
GMNA
MNA
AISC (USA)
Tutorial
Structural design of a steel cross-beam affected by lateral torsional buckling (EN)
Then, choose the design code, starting material properties, and the type of topology. Define the span of the analyzed member to 4 m . The new project is generated and you can start with the design. 2 Analyzed members The convenient way how to design structural detail in IDEA StatiCa Member This pre-defined connection is saved in the IDEA StatiCa Connection design set.
Stahl
EN (Eurocode)
Member
Buckling
GMNA
Tutorial
RAM Structural Systems BIM link for steel connection design (AISC)
The import has been developed for Steel Connection and Steel Member Design in Checkbot. Once you finish with the connection design, you can close the connection and go back to Checkbot to continue with the design process. Forces in the Brace will be used to design the connection. Forces on Concrete 1D elements are skipped on the import process.
Stahl
Checkbot
RAM Structural System
Tutorial
MIDAS CIVIL NX BIM link for steel connection design
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between MIDAS CIVIL More about the workflow in the Checkbot, see the article Checkbot – bulk BIM workflows . 3 Connection Design Select the connection C2 (corresponds to the The operations will now be added to the joint design. First, use the operation Cut for the members M1 and M2 .
Stahl
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
Tutorial
Robot Structural Analysis BIM link for concrete structural design (EN)
We will describe how to design, reinforce, and check a prestressed concrete double-span beam according to Eurocode. 1 How to activate the link Download Now, you can move to the Tendon design by the button on the top ribbon. In the left tree, you open Tendons – Tendons Layout . In Concrete Design 1D – Data in the left tree, you can find the settings of the checks that will be evaluated.
Beton
Beam
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
ETABS BIM link for reinforced concrete wall design (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a reinforced concrete wall using the BIM link between ETABS and IDEA Once in the window of Checkbot , choose a Concrete project, and the design code you want to use – Eurocode in our case. Then click Create project .
Beton
Detail 2D
Checkbot
EN (Eurocode)
ETABS
CSFM
Wall
Tutorial
Midas Civil BIM link for design of three-span post-tensioned bridge
If you are importing for the first time, configure the generation of design groups and members. The BIM app will automatically combine the imported bridge superstructure into a single design member. Checks Now, you will move to the Data tab in the 1D Concrete Design group.
Beton
EN (Eurocode)
midas Civil + Gen
Load effects
Geometry
Bridges
Tutorial
SAP2000 BIM link for the structural design of a steel member (EN)
The Checkbot pops up, and you select New , desired Design code (EN), and finally Create project . Do the same for columns 1+2 and 7+8 3 Design Now you can run the module Member by right-clicking on the selected member and clicking on Open .
Stahl
Member
Checkbot
BIM link
SAP2000
EN (Eurocode)
Tutorial
SAP2000 BIM link for the structural concrete design (EN)
The beam will be code-checked according to Eurocode with a design working life of 50 years. All internal forces will be exported from the SAP2000 .
Beton
EN (Eurocode)
BIM link
SAP2000
Beam
Tutorial
Horizontal beam-column-brace gusset (AISC)
Create a new project by selecting a starting template closest to the desired design, filling in the name, and choosing the design code and default material More load cases can be added. 4 Design Before the connection can be modeled, make sure to Explode the parametric template . Finish the design with the operation Stiffener . And set the correct properties of STIFF1 .
Stahl
AISC (USA)
Connection
Shear connection
Tutorial
Grasshopper API link - bulk calculation of steel joints (06) version 24
In this tutorial, you will learn how to use a parametric template for a bulk calculation of steel joints with the same geometry. IDEA StatiCa Checkbot – import of a structure, design of a joint Open the attached folder with a structure imported from 3rd party software. You can design it correctly according to your needs or use our fully prepared joint here .
Stahl
Connection
Tutorial
Grasshopper API link - bulk calculation of steel joints (06)
In this tutorial, you will learn how to use a parametric template for a bulk calculation of steel joints with the same geometry. IDEA StatiCa Checkbot – import of a structure, design of a joint Open the attached folder with a structure imported from 3rd party software. You can design it correctly according to your needs or use our fully prepared joint here .
Stahl
Connection
IDEA Open Model (API)
Grasshopper
Checkbot
Modeling
Tutorial
Reinforced walking column (ACI)
Start with IDEA StatiCa Detail to design and code-check concrete discontinuity regions. Nevertheless, the design code can be chosen only in this first step of the project. 2 Geometry The Detail application will open with the Design tab automatically First, we can switch to the Tools tab and start the Topology Optimization in Design tools that help you to design the reinforcement (alternatively, you
Beton
Detail 2D
ACI (USA)
Wall
Tutorial
BIM link Connection to Detail - Eccentrically loaded anchoring
Support The ground has some stiffness, which should be considered for precise design. If you would design a footing from scratch in the Detail application, both options would be ON. You have checked the whole connection design according to the codes EN 1993-1-8 and EN 1992-4.
Beton
Stahl
Connection
EN (Eurocode)
CBFEM
CSFM
Detail 3D
Tutorial
Connection tutorial - Tubular 3D frame (AISC)
Create a new project by selecting the template closest to the required design, fill the name and the description of the project. After choosing the required properties, confirm by Create blank design . The last step in the design of the joint is the last copy of the CUT3.
Stahl
AISC (USA)
Connection
Tubes
Modeling
Manufacturing operations
Tutorial
Concrete column - Fire analysis (EN)
In this step-by-step tutorial, you will learn how to design and code-check concrete column exposed the fire according to EN 1991-2. The load used for fire design, according to EN 1992-1, can be considered as 70% of ULS. The point and line load represent the fire design load. 3 Check The model is done.
Beton
Member
EN (Eurocode)
Fire resistance
Tutorial
AxisVM BIM link for steel member buckling analysis (EN)
Now you can click on Open , a new window with the module Member appears. 3 Design To get the analysis of the member, we first have to design all the joints For node 8 , you can use the same design as for node 6 . Just click on Apply . Here is the design of the last node 4 . AxisVM-Gusset plate AxisVM-Gusset plate The last operation in Member , you will apply are openings along with the member M3 4 Analysis When finishing with the design
Stahl
Member
Checkbot
AxisVM
EN (Eurocode)
Tutorial, Verifizierungen
Strengthening of longitudinal bracing
The design compressed force of -38.7 kN is related to the end of the analyzed member. Design Modify the analyzed member AM1(1). Takeaways: Hand calculations are a great tool for preliminary design.
Stahl
Member
EN (Eurocode)
GMNA