Idea Statica
  • Steel
  • Concrete
  • BIM & Workflows
  • Support & Learning
  • Pricing
  • Company
  • Steel overview
  • Connection design
  • Member design
  • Parametric design
  • Steel case studies
  • Concrete overview
  • Walls and D-regions
  • Anchoring design
  • Concrete case studies
  • BIM Overview
  • Supported integrations
  • Checkbot
  • Viewer
  • APIs
  • Support Center
  • E-learning & certification
  • Blog
  • Downloads & Licensing
  • Plans
  • Free community tool
  • Enterprise customers
  • Students & educators
  • How much will you save?
  • About us
  • Contact
  • Research & development
  • Authorized resellers
  • Meet our customers
  • Career
  • Steel
    Steel overviewConnection designMember designParametric designSteel case studies
  • Concrete
    Concrete overviewWalls and D-regionsAnchoring designConcrete case studies
  • BIM & Workflows
    BIM OverviewSupported integrationsCheckbotViewerAPIs
  • Support & Learning
    Support CenterE-learning & certificationBlogDownloads & Licensing
  • Pricing
    PlansFree community toolEnterprise customersStudents & educatorsHow much will you save?
  • Company
    About usContactResearch & developmentAuthorized resellersMeet our customersCareer
14-Day Trial
14-Day Trial

Subscribe to our newsletter

Company

  • About us
  • Partners
  • Careers
  • Patent

Resources

  • Customer projects
  • Case studies
  • Connection Library
  • Verification books

Legal

  • EULA
  • Global privacy policy
  • California Privacy
  • TOS Viewer
  • Licensing

Help

  • Contact
  • Quote request
  • Resellers
  • Downloads
FacebookInstagramLinkedInYouTube

© IDEA StatiCa 2009-2026

Trusted and used worldwide by engineers, fabricators & consultants.

Support CenterTutorialsRFEM/RSTAB BIM link for steel member design (EN)
RFEM/RSTAB BIM link for steel member design (EN)
SteelMember designTutorialsMemberEN (Eurocode)

RFEM/RSTAB BIM link for steel member design (EN)

This article is also available in
ENCZDEESFRITPTNLHUROKRPLTHTRVIZH

By following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between Dlubal RFEM/RSTAB and IDEA StatiCa.

How to activate the link

  • Download and install the latest version of IDEA StatiCa
  • Make sure that you are using a supported version of your FEA/BIM solution

IDEA StatiCa integrates BIM links into your FEA/BIM solutions during its installation. You can check the status and activate more BIM links for software installed after in the BIM link installer.

Please note that some FEA solutions require additional steps to fully activate their BIM link to IDEA StatiCa.

Open IDEA StatiCa and navigate to the BIM tab and open the BIM link installer (Activate your BIM link...).

A notification "Do you want to allow this app to make changes to your device?" may appear, if so, please confirm with the Yes button.

How to activate the link - RFEM 5 and RSTAB 8

The BIM link for the selected software (if found) is installed. The screen also tells you the status of other BIM links that may have already been installed. Possibly click Install to activate any BIM link.

How to activate the link - RFEM 6 and RSTAB 9

In the BIM link installer, click Install to create a shortcut icon IDEA StatiCa 2X.X for RFEM 6/IDEA StatiCa 2X.X for RSTAB 9 on your desktop.

Note: original file in path C:\Program Files\IDEA StatiCa\StatiCa 2X.X\net6.0-windows\IdeaRFEMLink.exe or IdeaRSTABLink.exe

Open RFEM 6/RSTAB 9 and navigate to the menu Options and Program options, and turn on the WebService to enable the data transfer.

How to use the link

Download and open the attached project, and run the calculation to get the internal forces over the structure.

How to use the link - RFEM 5 and RSTAB 8

In the ribbon menu navigate to Add-on modules and External Modules and IDEA StatiCa Checkbot.

How to use the link - RFEM 6 and RSTAB 9

In RFEM 6/RSTAB 9 there is no ribbon menu command. Instead, with opened RFEM 6/RSTAB 9 project, go to your desktop and run the shortcut icon IDEA StatiCa 2X.X for RFEM 6/IDEA StatiCa 2X.X for RSTAB 9.

The Checkbot app, which serves as the BIM link manager opens, and you can start a new project.

Select the New option with project type Steel and design code EN. Then select Create project.

The new Checkbot project is ready to import connections from RFEM/RSTAB.

In RFEM/RSTAB, select one of the inside members, as shown in the following picture. 

Import

Then, in Checkbot select the Member command.

This will import the member with load effects and all related members into Checkbot - with the exact coordinates, orientations, and section sizes as per the FEA/BIM model.

Please note that your node and member numbering might be different. 

Geometry

In Checkbot you can merge separated members into a continuous one. Merge both supporting beams as related members. Select the related member M-49, click the Merge command.

 Here, select also the the M-48 related member and confirm.

Repeat the same for the other supporting related members.

You can control which load cases and combinations will be used for the analysis in the Checkbot application by clicking on Loads and managing the Result classes for the checks column.

You can delete or add items via right-click or drag-and-drop between columns.

Connections - Arrangement and Group creation

Since we have two similar joints, IDEA StatiCa has already grouped them into a single Arrangement.  To design and get both joints checked in one stem, we have to group them. Select both, right-click, and click on Create group.  

Select the reference connection (underlined in the tree) that drives the group's design, then open it.

Design of joint 

Click on Operation and select Plate to plate. Set the values according to the picture. Then click on Editor.

Click on Explode and delete bolts 1 and 3.

And set coordinates for bolts 2 and 4 according to the picture. Confirm changes by clicking OK. 

The next operation is the Stiffening member, set L-profile L80x6 with the following values. 

Add the operation Bolt/Anchor grid and modify the parameters.

Copy this operation and change the selected values.

Now add a Stiffening plate to the joint.

And modify its shape in the plate Editor.

Here, add the Chamfer operation to cut the plate.

The last operation is the Cut of plate.

Now click on Save and close the module Connection.

Member design

Now, select member M101  and click Open to start the design.

Check and Control

Before starting the analysis, firstly left-click on the U-member, add operation Lateral Restraint, and set up the values according to the picture.

In the next step add operation Stiffeners the same way as in the previous step, and configure the values as shown

For the realistic behavior of the related members, restrict the supports of the connecting purlins to X, Y, Z, and Rx. 

Do the same for the I-profiles frame members; restrict them to  X, Y, Z, and Rx, Ry, Rz. 

Now the member is ready to be analyzed.

 Select the Tab Check and run the MNA (materially non-linear) Analysis. 

The second analysis is LBA (lateral buckling analysis), where we get a critical factor of less than 15.

This result shows the necessity of running the GMNIA (geometrically and materially non-linear analysis).

Because lateral-torsional buckling is investigated, factor k0 = 0.5 may be used. Amplitude 0.5 • 5000 / 200 = 12,5 mm is applied to the first buckling mode. 

Click on the imperfection field for the critical buckling factor, and fill the value we calculated above in the row, as shown in the following picture. Then you can run the last GMNIA (geometrically and materially non-linear) analysis.  

Read more about:

  • Member stability in IDEA StatiCa Member.
  • Lateral torsional buckling

Report

At last, go to the tab Report. IDEA StatiCa offers a fully customizable report to be printed out or saved in .doc editable format.

Synchronize members

Sometimes, there are changes to your FEA/BIM model, such as different member section size or loads. These can be synchronized between Checkbot and the FEA/BIM model.

There are two possible alternatives:

  • Synchronize the Current item (if one or more joints are selected)
  • Synchronize the whole imported Structural model

To test this feature, you can change a member section size or shape in your FEA/BIM application or amend a load case or combination etc: change columns to a bigger section. Remember to re-analyze the FEA model.

In Checkbot select the changed members (there may be more than one) and from the Current item panel, select Sync.

The Checkbot project will be updated, member (and connections) design is preserved, but the results will be invalidated. You can see that the column is now updated - matching the change in the FEA model.

Simply code-check the highlighted member again by selecting Calculate from the Current item panel.  Please remember that bigger changes in the model might require additional validation steps with the affected members (as above).

If the members do not give the desired results, then you can open them again to optimize the design (i.e. strengthen if they fail the code-check or lighten if the utilization is too low).

You have successfully linked RFEM/RSTAB with IDEA StatiCa Member via Checkbot.

Read more about the known limitations of the RFEM/RSTAB BIM link.

Download

Want to improve your skills? Visit our Campus

Learn how to use IDEA StatiCa effectively with our self-paced e-learning courses

Start learning

Related articles

By following this step-by-step tutorial, you will learn how to make the structural design of a steel frame using IDEA StatiCa Member. An example is an anchored frame with an inclined column.
  • Steel
  • Member
  • EN (Eurocode)
  • +3
  • Steel
  • Member
  • EN (Eurocode)

Tutorials

Structural design and code-check of a steel frame (EN)

Read more
Known limitations for RFEM/RSTAB
  • Steel
  • Checkbot
  • BIM link
  • RFEM
  • RSTAB
  • Limitations
  • +6
  • Steel
  • Checkbot
  • BIM link
  • RFEM
  • RSTAB
  • Limitations

Knowledge base

Known limitations for RFEM/RSTAB

Read more
Checkbot – bulk BIM workflows
  • Steel
  • Checkbot
  • BIM link
  • v25.1
  • v25.0
  • +5
  • Steel
  • Checkbot
  • BIM link
  • v25.1
  • v25.0

Knowledge base

Checkbot – bulk BIM workflows

Read more
IDEA StatiCa Member – Solution for buckling
  • Steel
  • Member
  • Buckling
  • +3
  • Steel
  • Member
  • Buckling

Webinar

IDEA StatiCa Member – Solution for buckling

Read more