Prea multe rezultate de căutare, vă rugăm să specificați termenul de căutare
Tutorial
Structural design of a prestressed concrete saddle beam (EN)
The following model will appear on your screen. 2 Design Let's modify the geometry a little bit to achieve a saddle beam. To add them click on the Tendon design in the ribbon. A new window is opened and you switch to the tab Tendon layout. The next part will deal with the actual design and checks of the model.
Concrete
Beam
EN (Eurocode)
Prestressed members
Tutorial
Structural design of a steel beam (AISC)
Learn how to use IDEA StatiCa Member to design and code-check a simply supported steel beam. To design the second supported joint, click on Connections CON2 and then Apply the recent connection CON1.
Steel
Member
Buckling
GMNA
MNA
AISC (USA)
Tutorial
Structural design of a steel cross-beam affected by lateral torsional buckling (EN)
Then, choose the design code, starting material properties, and the type of topology. Define the span of the analyzed member to 4 m . The new project is generated and you can start with the design. 2 Analyzed members The convenient way how to design structural detail in IDEA StatiCa Member This pre-defined connection is saved in the IDEA StatiCa Connection design set.
Steel
EN (Eurocode)
Member
Buckling
GMNA
Tutorial
Structural design of a concrete frame joint (EN)
Learn how to design and code-check a concrete frame joint using application IDEA StatiCa Detail. SLS Combination you can select which code checks shall be performed. 4 Reinforcement Once the load has been defined, you can proceed to reinforcement design Before you design one, you can try to run the Topology Optimization tool to see how the most effective reinforcement layout should look like if you want
Concrete
EN (Eurocode)
Detail 2D
Tutorial
RAM Structural Systems BIM link for steel connection design (AISC)
The import has been developed for Steel Connection and Steel Member Design in Checkbot. Once you finish with the connection design, you can close the connection and go back to Checkbot to continue with the design process. Forces in the Brace will be used to design the connection. Forces on Concrete 1D elements are skipped on the import process.
Steel
Checkbot
RAM Structural System
Tutorial
SAP2000 BIM link for the structural design of a steel connection (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between SAP2000 and From the Design tab in the Options panel choose LRFD 2016 from the sub-code list. The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Connection
AISC (USA)
SAP2000
Checkbot
Tutorial
RFEM BIM link for the structural concrete beam design (EN)
After that, continue to the tendon design. 5 Tendon design Import all pre-tensioned tendons from the template. For the construction stage at the End of design working life add the variable load cases LC3 and LC4 . The prescriptions of envelopes can be seen at the bottom of the window. 10 Concrete Design The settings of the checks can be defined in the Data tab.
Concrete
Beam
EN (Eurocode)
BIM link
RFEM
RSTAB
Prestressed members
Tutorial
MIDAS CIVIL NX BIM link for steel connection design
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between MIDAS CIVIL More about the workflow in the Checkbot, see the article Checkbot – bulk BIM workflows . 3 Connection Design Select the connection C2 (corresponds to the The operations will now be added to the joint design. First, use the operation Cut for the members M1 and M2 .
Steel
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
Tutorial
Robot Structural Analysis BIM link for concrete structural design (EN)
We will describe how to design, reinforce, and check a prestressed concrete double-span beam according to Eurocode. 1 How to activate the link Download Now, you can move to the Tendon design by the button on the top ribbon. In the left tree, you open Tendons – Tendons Layout . In Concrete Design 1D – Data in the left tree, you can find the settings of the checks that will be evaluated.
Concrete
Beam
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
How to combine Tekla Structures and SAP2000 for steel connection design (EN)
The Checkbot appears and you can select the Design code (EN) . Confirm the import by clicking Connection . software you use). 3 How to use the link (Tekla Structures) You can proceed and export the same joint model from Tekla Structures to import the connection design You have combined joint form Tekla Structures and SAP2000 and code-checked a structural steel joint according to EN. 8 Synchronize models The design process
Steel
Checkbot
EN (Eurocode)
BIM link
Tekla Structures
SAP2000
Connection
Tutorial
Structural design of a pier cap from DXF (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a pier cap by DXF references in IDEA StatiCa Detail. 1 New project the user knows how to reinforce a pier cap and prepared some reinforcement in DXF in advance from drawings thus, we leave the tools for reinforcement design
Concrete
Detail 2D
EN (Eurocode)
Pier caps
Tutorial
Structural design of a concrete beam with an opening (EN)
In the first step, select the desired class and topology, you can then define the design code (choose EN ) as well as the concrete grade and cover (use You can change your choice of material (or add another one) later, nevertheless, the design code can be chosen only in this first step of the project.
Concrete
EN (Eurocode)
Detail 2D
CSFM
Tutorial
Structural design of a dapped end with an opening (EN)
By following this tutorial step-by-step, you will learn how to design and code-check a dapped end with an opening in IDEA StatiCa Detail. 1 New project Before doing that, you would like to see, how to reinforce it based on design tools results. Click on the Linear analysis icon to run it.
Concrete
EN (Eurocode)
Detail 2D
CSFM
Openings
Tutorial
ETABS BIM link for reinforced concrete wall design (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a reinforced concrete wall using the BIM link between ETABS and IDEA Once in the window of Checkbot , choose a Concrete project, and the design code you want to use – Eurocode in our case. Then click Create project .
Concrete
Detail 2D
Checkbot
EN (Eurocode)
ETABS
CSFM
Wall
Tutorial
Midas Civil BIM link for design of three-span post-tensioned bridge
If you are importing for the first time, configure the generation of design groups and members. The BIM app will automatically combine the imported bridge superstructure into a single design member. Checks Now, you will move to the Data tab in the 1D Concrete Design group.
Concrete
EN (Eurocode)
midas Civil + Gen
Load effects
Geometry
Bridges
Tutorial
SAP2000 BIM link for the structural design of a steel member (EN)
The Checkbot pops up, and you select New , desired Design code (EN), and finally Create project . Do the same for columns 1+2 and 7+8 3 Design Now you can run the module Member by right-clicking on the selected member and clicking on Open .
Steel
Member
Checkbot
BIM link
SAP2000
EN (Eurocode)
Tutorial
Axis BIM link for the detailed concrete beam design (EN)
You will learn how to activate and use the link between AxisVM, IDEA StatiCa Beam, and IDEA StatiCa Detail to easily design, reinforce and code-check deep This information is essential for ensuring the structural integrity and capacity of the design. The Crack Width tab provides essential information for the SLS check, ensuring compliance with design requirements.
Concrete
Detail 2D
EN (Eurocode)
AxisVM
Openings
Tutorial
SAP2000 BIM link for the structural concrete design (EN)
The beam will be code-checked according to Eurocode with a design working life of 50 years. All internal forces will be exported from the SAP2000 .
Concrete
EN (Eurocode)
BIM link
SAP2000
Beam
Tutorial
Horizontal beam-column-brace gusset (AISC)
Create a new project by selecting a starting template closest to the desired design, filling in the name, and choosing the design code and default material More load cases can be added. 4 Design Before the connection can be modeled, make sure to Explode the parametric template . Finish the design with the operation Stiffener . And set the correct properties of STIFF1 .
Steel
AISC (USA)
Connection
Shear connection
Tutorial
Grasshopper API link - bulk calculation of steel joints (06) version 24
In this tutorial, you will learn how to use a parametric template for a bulk calculation of steel joints with the same geometry. IDEA StatiCa Checkbot – import of a structure, design of a joint Open the attached folder with a structure imported from 3rd party software. You can design it correctly according to your needs or use our fully prepared joint here .
Steel
Connection
Tutorial
Grasshopper API link - bulk calculation of steel joints (06)
In this tutorial, you will learn how to use a parametric template for a bulk calculation of steel joints with the same geometry. IDEA StatiCa Checkbot – import of a structure, design of a joint Open the attached folder with a structure imported from 3rd party software. You can design it correctly according to your needs or use our fully prepared joint here .
Steel
Connection
IDEA Open Model (API)
Grasshopper
Checkbot
Modeling
Tutorial
Reinforced column with a bracket (EN)
Start with IDEA StatiCa Detail to quickly design and code-check concrete discontinuity regions. help you to design the reinforcement. Read more about Topology Optimization Now design the reinforcement. You can reinforce your detail based on the results from the Design tools.
Concrete
Detail 2D
EN (Eurocode)
Corbels/Brackets
Tutorial
Reinforced walking column (ACI)
Start with IDEA StatiCa Detail to design and code-check concrete discontinuity regions. Nevertheless, the design code can be chosen only in this first step of the project. 2 Geometry The Detail application will open with the Design tab automatically First, we can switch to the Tools tab and start the Topology Optimization in Design tools that help you to design the reinforcement (alternatively, you
Concrete
Detail 2D
ACI (USA)
Wall
Tutorial
BIM link Connection to Detail - Eccentrically loaded anchoring
Support The ground has some stiffness, which should be considered for precise design. If you would design a footing from scratch in the Detail application, both options would be ON. You have checked the whole connection design according to the codes EN 1993-1-8 and EN 1992-4.
Concrete
Steel
Connection
EN (Eurocode)
CBFEM
CSFM
Detail 3D
Tutorial
Connection tutorial - Tubular 3D frame (AISC)
Create a new project by selecting the template closest to the required design, fill the name and the description of the project. After choosing the required properties, confirm by Create blank design . The last step in the design of the joint is the last copy of the CUT3.
Steel
AISC (USA)
Connection
Tubes
Modeling
Manufacturing operations
Tutorial
Buckling analysis of a steel connection (EN)
This tutorial shows how to use IDEA StatiCa Connection to model, design and check a structural steel joint and calculate the buckling of the connection Create a new project by selecting the starting template closest to the desired design. Fill in the name, select the steel grade S355 , design code Eurocode , and Create project .
Steel
Connection
Buckling
EN (Eurocode)
Tutorial
Concrete column - Fire analysis (EN)
In this step-by-step tutorial, you will learn how to design and code-check concrete column exposed the fire according to EN 1991-2. The load used for fire design, according to EN 1992-1, can be considered as 70% of ULS. The point and line load represent the fire design load. 3 Check The model is done.
Concrete
Member
EN (Eurocode)
Fire resistance
Tutorial
AxisVM BIM link for steel member buckling analysis (EN)
Now you can click on Open , a new window with the module Member appears. 3 Design To get the analysis of the member, we first have to design all the joints For node 8 , you can use the same design as for node 6 . Just click on Apply . Here is the design of the last node 4 . AxisVM-Gusset plate AxisVM-Gusset plate The last operation in Member , you will apply are openings along with the member M3 4 Analysis When finishing with the design
Steel
Member
Checkbot
AxisVM
EN (Eurocode)
Tutorial, Exemplu de verificare
Strengthening of longitudinal bracing
The design compressed force of -38.7 kN is related to the end of the analyzed member. Design Modify the analyzed member AM1(1). Takeaways: Hand calculations are a great tool for preliminary design.
Steel
Member
EN (Eurocode)
GMNA
Tutorial
Stiffness analysis of a connection with a custom cross-section (EN)
This tutorial shows how to use IDEA StatiCa Connection to model, design and check a structural steel joint and calculate the stiffness of the connection Create a new project by selecting the starting template from wizard closest to the desired design. Fill in the name, select the steel grade S355 , design code Eurocode , and Create project . 2 Geometry We will start with a definition of the custom cross-section
Steel
Connection
EN (Eurocode)
Rotational stiffness
Stiffness