Too many search results, please specify search term
Tutorials, Verifications
Strengthening of longitudinal bracing
The design compressed force of -38.7 kN is related to the end of the analyzed member. Design Modify the analyzed member AM1(1). Takeaways: Hand calculations are a great tool for preliminary design.
Steel
Member
EN (Eurocode)
GMNA
Tutorials
Connection tutorial - Tubular 3D frame (AISC)
Learn how to use IDEA StatiCa Connection to design and code-check a structural steel joint, an example is the connection of a tubular 3D frame. 1 New project Create a new project by selecting the template closest to the required design, fill the name and the description of the project. The last step in the design of the joint is the last copy of the CUT3.
Steel
AISC (USA)
Connection
Tubes
Modeling
Manufacturing operations
Tutorials
Learning Module: Load Path and Failure Modes of Fixed connections (EN)
Connection design can be difficult to teach, given the detailed nature of the topic and the fundamentally three-dimensional behavior of most connections of failure modes, are general and applicable to structural design broadly. This connection is loaded by design shear force 270 kN and design bending moment 700 kNm. The loads are specified in node.
Steel
Connection
EN (Eurocode)
Plates
Welds
Bolts
Tutorials
Stiffness analysis of a connection with a custom cross-section (EN)
This tutorial shows how to use IDEA StatiCa Connection to model, design and check a structural steel joint and calculate the stiffness of the connection Create a new project by selecting the starting template from wizard closest to the desired design. Fill in the name, select the steel grade S355 , design code Eurocode , and Create project . 2 Geometry We will start with a definition of the custom cross-section
Steel
Connection
EN (Eurocode)
Rotational stiffness
Stiffness
Tutorials
RCS API - Sensitivity study of reinforcements
Overview of upcoming steps Apply a reinforcement template to the selected design section Run the calculation Extract the results you want to check from IDEA StatiCa RCS Client is a component of IDEA StatiCa, a software solution widely used for the design and code-checking of structural elements, including Code Compliance : The RCS Client checks the design against various international codes, ensuring that the sections meet safety and performance standards
Concrete
IDEA Open Model (API)
EN (Eurocode)
Tutorials
Eccentrically loaded anchoring in Detail
The tutorial shows how to design and code-check a reinforced concrete block according to Eurocode. Back in the Design tab, add a new Single Anchor. Now, create a design load combination . You can add the combination factors based on the code.
Concrete
EN (Eurocode)
CSFM
Detail 3D
Tutorials
Stiffness analysis of a steel connection (AISC)
Learn how to use software IDEA StatiCa to model, design and check a structural steel joint and calculate the stiffness of the connection. 1 New project Create a new project by selecting a starting template closest to the desired design, fill the name and choose AISC 360-22 (LRFD) design code and default More load cases can be added. 4 Design You will define a set of manufacturing operations to model connections between members.
Steel
AISC (USA)
Stiffness
Connection
Tutorials
Buckling analysis of a steel connection (AISC)
Learn how to use IDEA StatiCa Connection to design and code-check a structural steel joint. Create a new project by selecting a template closest to the required design and fill the name and the description of the project. Input the –15 kip normal force in the tab for member B1. 4 Design Now define the manufacturing operation.
Steel
AISC (USA)
Connection
Buckling
Tutorials
RCS API - Crack width study
IDEA StatiCa RCS Client is a component of IDEA StatiCa, a software solution widely used for the design and code-checking of structural elements, including Code Compliance : The RCS Client checks the design against various international codes, ensuring that the sections meet safety and performance standards RCS Client can work in conjunction with other IDEA StatiCa modules, such as those for steel connections or concrete members, providing a comprehensive design
Concrete
IDEA Open Model (API)
EN (Eurocode)
Tutorials
Bridge column (EN)
In this step-by-step tutorial, you will learn how to design and code-check the bridge column in IDEA StatiCa Member. 1 New project Open IDEA StatiCa and Then, choose the project type Concrete (2) , and change the Concrete grade and Design working time (3). Choose the type of topology (4) . Finally, click on Create project (11). 2 Design The column is now created with related members. Delete all Related members .
Concrete
Member
EN (Eurocode)
Bridges
Tutorials
Prestressed bridge diaphragm (EN)
By following this tutorial step-by-step, you will learn how to use IDEA StatiCa Detail and how to design and code-check a prestressed bridge diaphragm. In the figure below the table you can see the result of the design for the ultimate limit state of the concrete. Note also the value of the ultimate stress in the concrete, which does not correspond to the design strength of the concrete.
Concrete
Detail 2D
EN (Eurocode)
Diaphragms
Bridges
Tutorials
Midas Civil BIM link for bridge load rating
Moving loads defined by Czech design code ČSN 73 6222 are used in this tutorial, however, despite the code used, method implemented in the BIM link is If you are importing for the first time, set up the generation of design groups and design members. The program automatically joins the imported bridge superstructure into one design member.
Concrete
RCS
BIM link
midas Civil + Gen
Bridges
Tutorials
Moment connection: Wide flange to HSS (AISC)
Follow the step by step guide to design a Wide flange to HSS Column connection. 1 New project Start by launching the IDEA StatiCa Connection . Create a new project by selecting the blank template, filling in the name, and choosing AISC design code and default steel grade – A992 .
Steel
Connection
AISC (USA)
Overall check
Tutorials
Prestressed beam with openings (EN)
By following this tutorial step-by-step, you will learn how to use IDEA StatiCa Detail and how to design and code-check a reinforced Prestressed beam with Let the Design tools display the regions with tension/compression. Turn on the Topology optimization. Now let's go back to the Design tab and turn off the Grid . Gradually modify the reinforcement items.
Concrete
Detail 2D
EN (Eurocode)
Openings
Prestressed members
Tutorials
Concrete slender column (EN)
In this step-by-step tutorial, you will learn how to design and code-check concrete slender column in IDEA StatiCa Member. 1 New project Open IDEA StatiCa Finally, click on Create project (9). 2 Design The column is now created with related members. Delete all Related members .
Concrete
Member
EN (Eurocode)
Tutorials
ETABS BIM link for steel member buckling analysis (AISC)
The member is now ready to be opened in IDEA StatiCa Member for the CBFEM analysis. 3 Design Automatic data transfer is started, and IDEA StatiCa Member To get the analysis of the member, we first have to design all the joints along with the member.
Steel
BIM link
ETABS
AISC (USA)
Member
Tutorials
Claw angle on WF bracing connection (AISC)
Learn how to use IDEA StatiCa Connection to design and code-check a structural steel joint, an example is a Claw angle on WF bracing connection. Since this project follows the AISC code, let's ensure that imperial units are set in the model (see How to change the system of units ). 2 Design First
Steel
AISC (USA)
Connection
Manufacturing operations
Modeling
Tutorials
Slab code-check using shell element in RCS (EN)
ensures adaptability with your FEA model where is used the 2D shell element. 3 Cross-section Define the Thickness 200 mm and Concrete grade C30/37 . 4 Design
Concrete
RCS
EN (Eurocode)
Tutorials
Grasshopper API link - how to create an IDEA StatiCa IOM file for imports (01) version 24
IDEA StatiCa Connection - Design of a joint and IOM export For the example, you will create a simple moment connection using a template: To be able to
Steel
Connection
Tutorials
Grasshopper API link - Cost estimation (05) version 24
IDEA StatiCa Connection – Design of a joint and set parameters For the example, you will create a simple moment connection using a template: Change both
Steel
Connection
Tutorials
Grasshopper API link - Cost estimation (05)
IDEA StatiCa Connection – Design of a joint and set parameters You can use this ideaCon file or create one from scratch according to the following steps
Steel
Connection
IDEA Open Model (API)
Grasshopper
Parametric design
Not exactly matching, but you might find helpful
Tutorials
How to get started with API - Basics 01
The Swagger in the online mode provides you guide about the options of API for Connection design. results.unity_check_message) except Exception as e: print(Operation failed : %s\n % e) Conclusion You have experience with API for connection design
Steel
Connection
IDEA Open Model (API)