Type of connection: simple welded connections
Unit system: Metric
Designed acc. to: AISC 360-16
Plate Materials: Plate and column – ASTM A572 – Gr. 50
Welds: Leg size = 3 mm, electrode E70XX
Simple welded connections are loaded by tension, compression, bending moment or shear to be utilized at 100 %.
Simple welded connections of a plate to a beam are designed so that welds will fail first. The plate is loaded by only one component at a time – tension, compression, bending or shear. The joint is loaded for weld to be utilized at 100 % and the load is compared to the weld resistance according to AISC 360-16.
In the case of bending both elastic and plastic stress distribution was calculated. Usually, more conservative elastic stress distribution is assumed although tensile strength of welds is used in formulas.
|a) elastic stress distribution||b) plastic stress distribution|
Base metal strength does not have to be evaluated in case of use of matching electrodes but it is shown here for verification.
Manual check is performed according to AISC 360-16 – J.2.4.
Weld strength without base metal check
Weld strength with base metal check
The results of both IDEA StatiCa Connection design and computation according to AISC Design examples gives nearly identical values in case of simple welds both with and without base metal check. IDEA provides slightly conservative results (at 98 %) for tension, compression and shear loading. Weld subjected to bending shows a behavior between elastic and plastic stress distribution, being closer to the plastic distribution.