Te veel zoekresultaten, specificeer zoekterm
Tutorial
Parametric design in IDEA StatiCa Connection - Tubular connection
Create model Start the Connection application and choose the following template and initial parameters (click on Blank design ): Tubular connection Change Developer tab To speed things up we shall make the model parametric and create a parametric template. relevant parameters to specific model properties: Click “ Set to model ” and see how the Connection changes based on the input parameters: Go back to the Design
Steel
Connection
IDEA Open Model (API)
Connection Library
Modeling
Tubes
Moment
Parametric
Tutorial
Parametric design in IDEA StatiCa Connection - Flush moment end plate connections
Parametric templates help you to reduce repetitive tasks and speed up your design process. In the right bottom corner, there is a sign (P) for Parametric. Parametric template for flush moment end plates You have acquired the skills to utilize parameters, create parametric templates, and undertake fundamental
Steel
Connection
Connection Library
Parametric design
IDEA Open Model (API)
AISC (USA)
Tutorial
EDGE Amsterdam West - parametric design in Grasshopper
Inspire yourself and step forward to the world of parametric design in Grasshopher.
Steel
IDEA Open Model (API)
Grasshopper
Parametric design
Tutorial
Base plate to concrete pedestal integrated design
Keep default settings for anchoring topology and step into the app. 2 Design Before any adjustments are made, make sure to Explode the parametric template The new Parametric templates offer a fast way of editing simple connections with the change of a few parameters. However, to view the full customization options, explode the parametric template and get access to the manufacturing operations.
Concrete
Steel
Connection
CBFEM
CSFM
Detail 3D
ACI (USA)
Anchoring
Tutorial
Grasshopper API link – parametric optimization of a connection weld (03) version 24
IDEA StatiCa Connection – Design of a joint and set parameters For the example, you will create a simple moment connection using a template: To be able
Steel
Connection
Tutorial
Grasshopper API link - how to import and calculate parametric connection model (02) version 24
IDEA StatiCa Connection – Design of a joint and set parameters For the example, you will create a simple moment connection using a template: To be able
Steel
Connection
Tutorial
Advance Design BIM link for concrete structural design (EN)
This tutorial will show how to activate and use the link between Advance Design and IDEA StatiCa Beam. Select Advance design and click the button Install . You have to select which results from the Advance design will be imported to IDEA StatiCa Beam . Follow the picture below.
Concrete
EN (Eurocode)
BIM link
Advance Design
Beam
Tutorial
Advance Design BIM link for the structural design of a steel connection (EN)
Select the Advance Design and click the button Install . Let’s say you need to change some entities in the Advance Design model. Now let's proceed with the Connection design command button.
Steel
BIM link
Advance Design
Connection
EN (Eurocode)
Tutorial
Steel joint design resistance (AISC)
Learn how to how to use software IDEA StatiCa to model, design and check a structural steel joint and calculate Joint design resistance. 1 New project design resistance tab in the result tables. The values of the Design load and Design resistance are provided to visualize the results.
Steel
Connection
AISC (USA)
Resistance
Tutorial
Fire Design Analysis of a Steel Member (EN)
Fill in the name, select the steel grade S355 , design code Eurocode , thick Fire Design checkbox, and Create project . To calculate the Fire design , enable this feature by clicking on the top ribbon Project button and ticking the Fire design checkbox in the information This means our design is safe for these conditions. 5 Report At last, go to the tab Report .
Steel
Member
EN (Eurocode)
Fire resistance
Tutorial
Structural design of a general 3D joint (EN)
Create a new project by selecting a starting template closest to the desired design, filling in the name, and choosing the design code and default material You have the final design of the cross-section for member SL. More load cases can be added. 4 Design Add a new one by the command new Operation at the top ribbon.
Steel
EN (Eurocode)
Connection
Modeling
Tutorial
Midas Civil BIM link for steel connection design
You can sort the design members into groups. It's suitable from the design point of view. Address the name of the joint for saving and run the application IDEA StatiCa Connection by using the Design button in the ribbon. 6 Design The connection The predefined template in IDEA StatiCa set, which will be used for design, is available for selection.
Steel
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
Tutorial
Video-tutorial of reinforced and prestressed beam design (EN)
In this tutorial, you will learn how to design and code-check a reinforced concrete beam in IDEA StatiCa Beam, according to Eurocode. The tutorial is split into two parts and guides you through what is possible during the design process. Part 1 The first part of this tutorial is focused on the initial phase of the design process.
Concrete
EN (Eurocode)
Beam
Tutorial
Structural design of a reinforced concrete slab (EN)
Learn how to use IDEA StatiCa RCS to design and code-check concrete slabs using the example of a simply supported orthogonal bridge deck. Cross-section The design requires the use of a 1 x 1 m slab element with a thickness of 700 mm and a concrete grade of C35/45 . Design member The section's exposure class determines its maximum crack width and detailing evaluation. Change the Chlorides class to XD3 .
Concrete
RCS
EN (Eurocode)
Overall check
ULS
Tutorial
RFEM/RSTAB BIM link for steel member design (EN)
Select the New option with project type Steel and design code EN . Then select Create project . Design Now, select member M101 and click Open to start the design. First, design connection 68 . As we have a similar connection in both nodes, you can copy the finished design to node 93 by clicking Apply .
Steel
Member
EN (Eurocode)
RFEM
RSTAB
Checkbot
Tutorial
Connection design of a tubular 3D frame (AISC)
Learn how to use IDEA StatiCa Connection to design and code-check a structural steel joint, an example is the connection of a tubular 3D frame. 1 New project Create a new project by selecting the template closest to the required design, fill the name and the description of the project. The last step in the design of the joint is the last copy of the CUT3.
Steel
AISC (USA)
Connection
Tubes
Tutorial, Voorbeeldproject
Structural design and code-check of a steel frame (AISC)
Then choose the design code/sub-code, starting material properties, and the type of topology (a frame). You may notice that the Design Code is different but in the next steps this is taken care of. To finish the design by modify the BP1 operation as shown in the picture below.
Steel
Member
AISC (USA)
Tutorial
Robot Structural Analysis BIM link for steel member design (EN)
After launching the Checkbot app select New with project type Steel and design code EN . Then select Create Project . Design Now, select member 202 and click Open to start the design. First, design connection N36 . As we have a similar connection in both nodes, you can copy the finished design to node N43 by clicking Apply .
Steel
Member
EN (Eurocode)
Checkbot
Robot Structural Analysis
Tutorial
Midas Civil BIM link for Concrete design
You can sort the design members into groups. It's suitable from the design point of view. The envelopes are included in the other combinations with permanent load cases. 4 Design In the Data card are predefined significant code -checks
Concrete
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
ACI (USA)
Tutorial
ETABS BIM link for steel connection design (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between ETABS and From the Design tab in the Options panel choose LRFD 2016 from the sub-code list. The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Connection
Checkbot
AISC (USA)
ETABS
Tutorial
SCIA Engineer BIM link for steel member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between SCIA Engineer and Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Checkbot
Member
EN (Eurocode)
SCIA Engineer
Tutorial
SAP2000 BIM link for steel Member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between SAP2000 and IDEA Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Member
Checkbot
EN (Eurocode)
SAP2000
GMNA
MNA
Tutorial
Autodesk Revit BIM link for connection design (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between Autodesk Select the New option with project type Steel and design code USA/ASD (AISC 360-16) . Then select Create project . The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Connection
Checkbot
Revit
AISC (USA)
Tutorial
Space Gass BIM link for the structural design of a steel connection (AS)
You can find it in the top ribbon under Design -gt; IDEA StatiCa Checkbot. In this case, the anchors fail because of their low design capacity. We must optimize the design to find the passing solution.
Steel
Connection
Checkbot
BIM link
EN (Eurocode)
Tutorial
ETABS BIM link for steel Member design (AISC)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between ETABS and IDEA StatiCa Select the New option with project type Steel and design code AISC LRFD 360-22 . Then select Create Project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Checkbot
Member
AISC (USA)
ETABS
GMNA
MNA
Tutorial
Autodesk Robot Structural Analysis Professional BIM link for steel member design (EN)
Design There are two ways we can design the member and its connections: Online - live within Checkbot maintaining a link to the FEA application Offline However, be mindful that some changes might result in an invalid design and as such these changes should undergo a thorough design review process. You can check and adjust the design, recalculate and code-check the member , save and close it.
Steel
Member
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
Design of Precast Concrete using User-defined Cross-section in IDEA StatiCa
When prioritizing building aesthetics, engineers often design irregular structures like precast façades and curtain walls, but commonly used software doesn't Learn how to design and code-check this type of condition with a breeze in IDEA StatiCa using the RCS application. Design and Code-check Now that we’re done with modelling the reinforcement, we’re now ready to run the calculation.
Concrete
RCS
EN (Eurocode)
DXF
Reinforcement
v24.0
Tutorial
Tekla Structural Designer BIM link for connection design (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between Tekla Structural The Checkbot project will be updated, connection design is preserved, but the results will be invalidated. If the connections do not give the desired results, then you can open them again to optimize the design (i.e. strengthen if they fail the code-check or
Steel
Connection
Checkbot
EN (Eurocode)
Tekla Structural Designer
Tutorial
AxisVM BIM link for steel Member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between AxisVM and IDEA Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Member
EN (Eurocode)
AxisVM
GMNA
MNA
Tutorial
Structural design of a steel beam (AISC)
Learn how to use IDEA StatiCa Member to design and code-check a simply supported steel beam. To design the second supported joint, click on Connections CON2 and then Apply the recent connection CON1.
Steel
Member
Buckling
GMNA
MNA
AISC (USA)