Te veel zoekresultaten, specificeer zoekterm
Tutorial
Autodesk Robot Structural Analysis Professional BIM link for steel member design (EN)
Design There are two ways we can design the member and its connections: Online - live within Checkbot maintaining a link to the FEA application Offline However, be mindful that some changes might result in an invalid design and as such these changes should undergo a thorough design review process. You can check and adjust the design, recalculate and code-check the member , save and close it.
Steel
Member
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
AxisVM BIM link for steel Member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between AxisVM and IDEA Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Member
EN (Eurocode)
AxisVM
GMNA
MNA
Tutorial
Design of Precast Concrete using User-defined Cross-section in IDEA StatiCa
When prioritizing building aesthetics, engineers often design irregular structures like precast façades and curtain walls, but commonly used software doesn't Learn how to design and code-check this type of condition with a breeze in IDEA StatiCa using the RCS application. Design and Code-check Now that we’re done with modelling the reinforcement, we’re now ready to run the calculation.
Concrete
RCS
EN (Eurocode)
DXF
Reinforcement
v24.0
Tutorial
Structural design of a steel beam (AISC)
Learn how to use IDEA StatiCa Member to design and code-check a simply supported steel beam. To design the second supported joint, click on Connections CON2 and then Apply the recent connection CON1.
Steel
Member
Buckling
GMNA
MNA
AISC (USA)
Tutorial
Structural design of a concrete frame joint (EN)
Learn how to design and code-check a concrete frame joint using application IDEA StatiCa Detail. SLS Combination you can select which code checks shall be performed. 4 Reinforcement Once the load has been defined, you can proceed to reinforcement design Before you design one, you can try to run the Topology Optimization tool to see how the most effective reinforcement layout should look like if you want
Concrete
EN (Eurocode)
Detail 2D
Tutorial
Structural design of a steel cross-beam affected by lateral torsional buckling (EN)
Then, choose the design code, starting material properties, and the type of topology. Define the span of the analyzed member to 4 m . The new project is generated and you can start with the design. 2 Analyzed members The convenient way how to design structural detail in IDEA StatiCa Member This pre-defined connection is saved in the IDEA StatiCa Connection design set.
Steel
EN (Eurocode)
Member
Buckling
GMNA
Tutorial
RAM Structural Systems BIM link for steel connection design (AISC)
The import has been developed for Steel Connection and Steel Member Design in Checkbot. Once you finish with the connection design, you can close the connection and go back to Checkbot to continue with the design process. Forces in the Brace will be used to design the connection. Forces on Concrete 1D elements are skipped on the import process.
Steel
Checkbot
RAM Structural System
Tutorial
SAP2000 BIM link for the structural design of a steel connection (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between SAP2000 and From the Design tab in the Connection label N3, ensure that LRFD 2022 is being used. The previously finished connection design is preserved, but the code-checks will be invalidated.
Steel
Connection
AISC (USA)
SAP2000
Checkbot
Tutorial
MIDAS CIVIL NX BIM link for steel connection design
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between MIDAS CIVIL More about the workflow in the Checkbot, see the article Checkbot – bulk BIM workflows . 3 Connection Design Select the connection C2 (corresponds to the The operations will now be added to the joint design. First, use the operation Cut for the members M1 and M2 .
Steel
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
Tutorial
Robot Structural Analysis BIM link for concrete structural design (EN)
We will describe how to design, reinforce, and check a prestressed concrete double-span beam according to Eurocode. Now, you can move to the Tendon design by the button on the top ribbon. In the left tree, you open Tendons – Tendons Layout . In Concrete Design 1D – Data in the left tree, you can find the settings of the checks that will be evaluated.
Concrete
Beam
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutorial
How to combine Tekla Structures and SAP2000 for steel connection design (EN)
The Checkbot appears and you can select the Design code (EN) . Confirm the import by clicking Connection . software you use). 3 How to use the link (Tekla Structures) You can proceed and export the same joint model from Tekla Structures to import the connection design You have combined joint form Tekla Structures and SAP2000 and code-checked a structural steel joint according to EN. 8 Synchronize models The design process
Steel
Checkbot
EN (Eurocode)
BIM link
Tekla Structures
SAP2000
Connection
Tutorial
ETABS BIM link for reinforced concrete wall design (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a reinforced concrete wall using the BIM link between ETABS and IDEA Once in the window of Checkbot , choose a Concrete project, and the design code you want to use – Eurocode in our case. Then click Create project .
Concrete
Detail 2D
Checkbot
EN (Eurocode)
ETABS
CSFM
Wall
Tutorial
Midas Civil BIM link for design of three-span post-tensioned bridge
If you are importing for the first time, configure the generation of design groups and members. The BIM app will automatically combine the imported bridge superstructure into a single design member. Checks Now, you will move to the Data tab in the 1D Concrete Design group.
Concrete
EN (Eurocode)
midas Civil + Gen
Load effects
Geometry
Bridges
Tutorial
SAP2000 BIM link for the structural design of a steel member (EN)
The Checkbot pops up, and you select New , desired Design code (EN), and finally Create project . Do the same for columns 1+2 and 7+8 3 Design Now you can run the module Member by right-clicking on the selected member and clicking on Open .
Steel
Member
Checkbot
BIM link
SAP2000
EN (Eurocode)
Tutorial
SAP2000 BIM link for the structural concrete design (EN)
The beam will be code-checked according to Eurocode with a design working life of 50 years. All internal forces will be exported from the SAP2000 .
Concrete
EN (Eurocode)
BIM link
SAP2000
Beam
Tutorial
Horizontal beam-column-brace gusset (AISC)
Create a new project by selecting a starting template closest to the desired design, filling in the name, and choosing the design code and default material More load cases can be added. 4 Design Before the connection can be modeled, make sure to Explode the parametric template . Finish the design with the operation Stiffener . And set the correct properties of STIFF1 .
Steel
AISC (USA)
Connection
Shear connection
Tutorial
Grasshopper API link - bulk calculation of steel joints (06) version 24
In this tutorial, you will learn how to use a parametric template for a bulk calculation of steel joints with the same geometry. IDEA StatiCa Checkbot – import of a structure, design of a joint Open the attached folder with a structure imported from 3rd party software. You can design it correctly according to your needs or use our fully prepared joint here .
Steel
Connection
Tutorial
General 3D joint (AISC)
Create a new project by selecting a starting template closest to the desired design, filling the name and choose AISC design code and default steel grade Input the values of internal forces into the chart and set the LRFD design code . More load cases can be added. 4 Design Add a new one by the command new Operation at the top ribbon.
Steel
AISC (USA)
Connection
Tutorial
Reinforced walking column (ACI)
Start with IDEA StatiCa Detail to design and code-check concrete discontinuity regions. Nevertheless, the design code can be chosen only in this first step of the project. 2 Geometry The Detail application will open with the Design tab automatically First, we can switch to the Tools tab and start the Topology Optimization in Design tools that help you to design the reinforcement (alternatively, you
Concrete
Detail 2D
ACI (USA)
Wall
Tutorial
Concrete column - Fire analysis (EN)
In this step-by-step tutorial, you will learn how to design and code-check concrete column exposed the fire according to EN 1991-2. The load used for fire design, according to EN 1992-1, can be considered as 70% of ULS. The point and line load represent the fire design load. 3 Check The model is done.
Concrete
Member
EN (Eurocode)
Fire resistance
Tutorial
Fire resistance of concrete structures
in IDEA StatiCa RCS and select the Functionality - Fire resistance EN 1992-1-2:2006-11 2 Geometry Select a T - section and fill in the dimensions. 3 Design If the load-bearing function (Criterium R) is required, only the necessary slab thickness assumed for design according to EN 1992-1-1 may be taken. For a conservative check, the ULS internal forces can be multiplied by the coefficient 0.7, and you receive the design internal forces for Fire resistance
Concrete
RCS
EN (Eurocode)
Tutorial
Stiffness analysis of a steel connection (AISC)
Learn how to use software IDEA StatiCa to model, design and check a structural steel joint and calculate the stiffness of the connection. 1 New project Create a new project by selecting a starting template closest to the desired design, fill the name and choose AISC 360-22 (LRFD) design code and default More load cases can be added. 4 Design You will define a set of manufacturing operations to model connections between members.
Steel
AISC (USA)
Stiffness
Connection
Tutorial
Buckling analysis of a steel connection (AISC)
Learn how to use IDEA StatiCa Connection to design and code-check a structural steel joint. Create a new project by selecting a template closest to the required design and fill the name and the description of the project. Input the –15 kip normal force in the tab for member B1. 4 Design Now define the manufacturing operation.
Steel
AISC (USA)
Connection
Buckling
Tutorial
Eccentrically loaded anchoring in Detail
The tutorial shows how to design and code-check a reinforced concrete block according to Eurocode. In the next step, the design values of the permanent load acting on the base plate will be defined. Now, create a design load combination . You can add the combination factors based on the code.
Concrete
EN (Eurocode)
CSFM
Detail 3D
Tutorial
Bridge column (EN)
In this step-by-step tutorial, you will learn how to design and code-check the bridge column in IDEA StatiCa Member. 1 New project Open IDEA StatiCa and Then, choose the project type Concrete (2) , and change the Concrete grade and Design working time (3). Choose the type of topology (4) . Finally, click on Create project (11). 2 Design The column is now created with related members. Delete all Related members .
Concrete
Member
EN (Eurocode)
Bridges
Tutorial
Midas Civil BIM link for bridge load rating
Moving loads defined by Czech design code ČSN 73 6222 are used in this tutorial, however, despite the code used, method implemented in the BIM link is If you are importing for the first time, set up the generation of design groups and design members. The program automatically joins the imported bridge superstructure into one design member.
Concrete
RCS
BIM link
midas Civil + Gen
Bridges
Tutorial
Prestressed bridge diaphragm (EN)
By following this tutorial step-by-step, you will learn how to use IDEA StatiCa Detail and how to design and code-check a prestressed bridge diaphragm. In the figure below the table you can see the result of the design for the ultimate limit state of the concrete. Note also the value of the ultimate stress in the concrete, which does not correspond to the design strength of the concrete.
Concrete
Detail 2D
EN (Eurocode)
Diaphragms
Bridges
Tutorial
Moment connection: Wide flange to HSS (AISC)
Follow the step by step guide to design a Wide flange to HSS Column connection. 1 New project Start by launching the IDEA StatiCa Connection . Create a new project by selecting the blank template, filling in the name, and choosing AISC design code and default steel grade – A992 .
Steel
Connection
AISC (USA)
Overall check
Tutorial
Prestressed beam with openings (EN)
By following this tutorial step-by-step, you will learn how to use IDEA StatiCa Detail and how to design and code-check a reinforced Prestressed beam with Let the Design tools display the regions with tension/compression. Turn on the Topology optimization. Now let's go back to the Design tab and turn off the Grid . Gradually modify the reinforcement items.
Concrete
Detail 2D
EN (Eurocode)
Openings
Prestressed members
Tutorial
Concrete slender column (EN)
In this step-by-step tutorial, you will learn how to design and code-check concrete slender column in IDEA StatiCa Member. 1 New project Open IDEA StatiCa Finally, click on Create project (9). 2 Design The column is now created with related members. Delete all Related members .
Concrete
Member
EN (Eurocode)