Trop de résultats de recherche, veuillez spécifier le terme recherché
Tutoriels
Structural design of a reinforced concrete slab (EN)
Learn how to use IDEA StatiCa RCS to design and code-check concrete slabs using the example of a simply supported orthogonal bridge deck. Cross-section The design requires the use of a 1 x 1 m slab element with a thickness of 700 mm and a concrete grade of C35/45 . Design member The section's exposure class determines its maximum crack width and detailing evaluation. Change the Chlorides class to XD3 .
Concrete
RCS
EN (Eurocode)
Overall check
ULS
Tutoriels
Structural design of a concrete wall (EN)
By following this tutorial step-by-step, you will learn how to use IDEA StatiCa Detail and how to design and code-check a reinforced concrete wall according If you do not want to display them, just click on the Design tool icon and it will be turned off. If you swith back to Design tab, you can display the Real 3D view on the top ribbon.
Concrete
EN (Eurocode)
Detail 2D
Wall
Tutoriels
RFEM/RSTAB BIM link for steel member design (EN)
Select the New option with project type Steel and design code EN . Then select Create project . Design Now, select member M101 and click Open to start the design. First, design connection 68 . As we have a similar connection in both nodes, you can copy the finished design to node 93 by clicking Apply .
Steel
Member
EN (Eurocode)
RFEM
RSTAB
Checkbot
Tutoriels
Structural design and code-check of a steel frame (EN)
Then choose the design code, starting material properties, and the type of topology. Instead of adding operations step-by-step, import a predefined template in 'Connection design Browser'. And then finish the design by modifying the BP1 operation as shown in the picture below.
Steel
Member
EN (Eurocode)
Tutoriels
Robot Structural Analysis BIM link for steel connection design (EN)
Select the New option with project type Steel and design code EN . Then select Create project . In this case, the anchors fail because of their low design capacity. We must optimize the design to find the passing solution.
Steel
Connection
EN (Eurocode)
Robot Structural Analysis
Checkbot
Tutoriels, Exemples de projets
Structural design and code-check of a steel frame (AISC)
Then choose the design code/sub-code, starting material properties, and the type of topology (a frame). You may notice that the Design Code is different but in the next steps this is taken care of. To finish the design by modify the BP1 operation as shown in the picture below.
Steel
Member
AISC (USA)
Tutoriels
Robot Structural Analysis BIM link for steel member design (EN)
After launching the Checkbot app select New with project type Steel and design code EN . Then select Create Project . Design Now, select member 202 and click Open to start the design. First, design connection N36 . As we have a similar connection in both nodes, you can copy the finished design to node N43 by clicking Apply .
Steel
Member
EN (Eurocode)
Checkbot
Robot Structural Analysis
Tutoriels
ETABS BIM link for steel connection design (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between ETABS and From the Design tab in the Options panel choose LRFD 2016 from the sub-code list. The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Connection
Checkbot
AISC (USA)
ETABS
Tutoriels
STAAD.Pro BIM link for steel connection design (AISC)
Select the New option with Steel project type, AISC design code and sub-code LRFD (AISC 360-16) and create project. From the Design tab in the Options panel choose LRFD 2016 from the sub-code list. The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Checkbot
AISC (USA)
BIM link
STAAD.Pro
Connection
Tutoriels
Structural design of a reinforced concrete T-section (EN)
In this tutorial, you will learn step-by-step how to design and code-check a reinforced concrete T-section according to Eurocode using the application You continue in Design member and deactivate Carbonation in the Member data tab. Proceed to Internal forces where you input the design values of internal forces . Let’s continue with the input of Reinforcement .
Concrete
RCS
EN (Eurocode)
Reinforcement
SIA (Switzerland)
Tutoriels
SCIA Engineer BIM link for structural concrete design (EN)
If you import for the first time, you need to set the generation of design groups and members. Also switch to design groups and select DG2 as you want to check all beams, highlighted in the main window, at the same time. 4 Design Go to the Data tab If you import for the first time, you need to set the generation of design groups and members.
Concrete
BIM link
SCIA Engineer
RCS
EN (Eurocode)
Tutoriels
Tekla Structures BIM link for connection design (EN)
Select the New option with project type Steel and design code EN . Then select Create project . You can continue with the design of additional connections using the same approach presented above. The Checkbot project will be updated, connection design is preserved but the results will be invalidated.
Steel
Connection
Checkbot
BIM link
Tekla Structures
EN (Eurocode)
Tutoriels
SCIA Engineer BIM link for steel member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between SCIA Engineer and Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Checkbot
Member
EN (Eurocode)
SCIA Engineer
Tutoriels
SAP2000 BIM link for steel Member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between SAP2000 and IDEA Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Member
Checkbot
EN (Eurocode)
SAP2000
GMNA
MNA
Tutoriels
Structural design of composite concrete section in RCS (EN)
Select the Prestressed section design . same tendon area, adjust the material properties of the tendon as indicated in the table below. material properties modification 5 Desing Member In Design Internal forces - 60days For the construction stage End of the design working life, change the Current Extreme to Stage 36500 and perform the same steps
Concrete
RCS
EN (Eurocode)
Prestressed members
midas Civil + Gen
Tutoriels
Autodesk Revit BIM link for connection design (AISC)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between Autodesk Select the New option with project type Steel and design code USA/ASD (AISC 360-16) . Then select Create project . The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Connection
Checkbot
Revit
AISC (USA)
Tutoriels
SAP2000 BIM link for the structural design of a steel connection (EN)
That completes the design of the connection for the column base plate with a diagonal brace. In this case, the anchors fail because of their low design capacity. We must optimize the design to find the passing solution.
Steel
Connection
Checkbot
BIM link
SAP2000
EN (Eurocode)
Tutoriels
AxisVM BIM link for structural concrete beam design (EN)
By following it step-by-step, you will learn how to activate and use the link between AxisVM and IDEA StatiCa Beam to easily design, reinforce and code-check We add all variable load cases which are assigned to LG2 (load group 2) to stage End of design working life . All load cases from this group will be added to ULS and SLS combinations. 6 Tendon design We activate all Construction Stages and run Tendon design to
Concrete
EN (Eurocode)
AxisVM
Beam
Tutoriels
Structural design of concrete structures with focus on fire resistance (EN)
Fire resistance - Geometry 3 Design Define the exposure class as XC3 and XD1 . Fire resistance - Design In the tab Fire resistance , leave the default settings of the Resistance R30 of the cross-section. Fire resistance - Calculation 4 Design In the Results tab, you can control if all checks are fulfilled.
Concrete
RCS
EN (Eurocode)
Tutoriels
Space Gass BIM link for the structural design of a steel connection (AS)
You can find it in the top ribbon under Design -gt; IDEA StatiCa Checkbot. In this case, the anchors fail because of their low design capacity. We must optimize the design to find the passing solution.
Steel
Connection
Checkbot
BIM link
EN (Eurocode)
Tutoriels
Structural design of a reinforced concrete beam (EN)
In this tutorial, you will learn how to design and code-check a reinforced concrete beam in IDEA StatiCa Beam according to Eurocode. 1 New project Let’ The following model will appear on your screen. 2 Design If you do not want to add more loads, you can continue directly to the internal forces tab in After these results, you come to the actual design and reinforcement of the beam.
Concrete
EN (Eurocode)
Beam
Tutoriels
ETABS BIM link for steel Member design (AISC)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between ETABS and IDEA StatiCa Select the New option with project type Steel and design code AISC LRFD 360-22 . Then select Create Project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Checkbot
Member
AISC (USA)
ETABS
GMNA
MNA
Tutoriels
Autodesk Robot Structural Analysis Professional BIM link for steel member design (EN)
Design There are two ways we can design the member and its connections: Online - live within Checkbot maintaining a link to the FEA application Offline However, be mindful that some changes might result in an invalid design and as such these changes should undergo a thorough design review process. You can check and adjust the design, recalculate and code-check the member , save and close it.
Steel
Member
EN (Eurocode)
BIM link
Robot Structural Analysis
Tutoriels
Design of Precast Concrete using User-defined Cross-section in IDEA StatiCa
When prioritizing building aesthetics, engineers often design irregular structures like precast façades and curtain walls, but commonly used software doesn't Learn how to design and code-check this type of condition with a breeze in IDEA StatiCa using the RCS application. Design and Code-check Now that we’re done with modelling the reinforcement, we’re now ready to run the calculation.
Concrete
RCS
EN (Eurocode)
DXF
Reinforcement
v24.0
Tutoriels
Robot Structural Analysis BIM link for steel connection design (AISC)
Select the New option with project type Steel and design code USA - Subcode LRFD (AISC 360-16) . Then select Create project . From the Design tab in the Connection label N3, ensure that LRFD 2022 is being used. The Checkbot project will be updated, connection design is preserved, but the results will be invalidated.
Steel
Connection
AISC (USA)
Robot Structural Analysis
Checkbot
Tutoriels
Tekla Structural Designer BIM link for connection design (EN)
By following this step-by-step tutorial, you will learn how to design and code-check a structural steel connection using the BIM link between Tekla Structural The Checkbot project will be updated, connection design is preserved, but the results will be invalidated. If the connections do not give the desired results, then you can open them again to optimize the design (i.e. strengthen if they fail the code-check or
Steel
Connection
Checkbot
EN (Eurocode)
Tekla Structural Designer
Tutoriels
AxisVM BIM link for steel Member design (EN)
Following this step-by-step tutorial, you will learn how to design and code-check a structural steel member using the BIM link between AxisVM and IDEA Select the New option with project type Steel and design code EN . Then select Create project . In the beginning, let us design the joints of the member U-profile, so please select the first connection and click on Edit connection .
Steel
Member
EN (Eurocode)
AxisVM
GMNA
MNA
Tutoriels
Tutorial for Midas Civil BIM link for concrete design
You can sort the design members into groups. It's suitable from the design point of view. The envelopes are included in the other combinations with permanent load cases. 4 Design In the Data card are predefined significant code -checks
Concrete
EN (Eurocode)
BIM link
midas Civil + Gen
Bridges
ACI (USA)
Tutoriels
Structural design of a prestressed concrete saddle beam (EN)
The following model will appear on your screen. 2 Design Let's modify the geometry a little bit to achieve a saddle beam. To add them click on the Tendon design in the ribbon. A new window is opened and you switch to the tab Tendon layout. The next part will deal with the actual design and checks of the model.
Concrete
Beam
EN (Eurocode)
Prestressed members
Tutoriels
Structural design of a steel beam (AISC)
Learn how to use IDEA StatiCa Member to design and code-check a simply supported steel beam. To design the second supported joint, click on Connections CON2 and then Apply the recent connection CON1.
Steel
Member
Buckling
GMNA
MNA
AISC (USA)