Released Feb 13, 2023
Beam | |
Case # | Description |
00032099 | The issue with running the Tendon module in AxisVM link solved |
BIM links | |
Case # | Description |
00032436 | STAAD.Pro BIM link: The bug with loads not being imported when Metric units were used has been fixed |
00032614 | Wrong import of solid track section from MIDAS fixed |
00032663 | The issue with the import of XML from Modest solved |
00032862 | STAAD.Pro BIM link: The bug with member orientation has been fixed |
00032911 | STAAD.Pro BIM link: The bug with loads not being imported when Metric units were used has been fixed |
00033003 | The translation is correct now |
00033010 | The bug with exporting from Tekla to IDEA leading to the wrong orientation of strip member has been fixed |
00033012 | A problem when mapping cold-formed sections in Checkbot has been resolved |
00033020 | STAAD.Pro BIM link: The bug with loads not being imported when Metric units were used has been fixed |
Connection | |
Case # | Description |
00030474 | A warning about the bolts in timber loaded out of the software scope has been added. The bolts can be analyzed in shear only |
00030761 | Welds on continuous members in the Operation Cut corrected |
00031902 | Improve the cut of a plate manufacturing operation on a circular stiffening member |
00032487 | A bug generated by activating the plate clash check was fixed |
00032508 | Corrected the appearance of clash warning in welded splice operation |
00032557 | Fixed possible crash when calculating Connection or Detail projects on older Windows subversions, solved by installing the latest Visual C++ Redistributables |
00032593 | The automatic welds are created in the PCUT operation |
00032739 | Corrected the behavior of the order of operations Contact and Welds |
00032777 | The user is now informed how to set units properly to prevent incorrect rounding |
00032795 | Spelling mistakes should be corrected now |
00032810 | Lengths of partial welds are now listed correctly in the results table/report |
00032936 | The ordering of the welds will not stop the calculation. |
00032944 | Bolt shear utilization ratio for pre-loaded bolts is now shown in the bolts results table |
00033030 | XLS import corrected |
Detail | |
Case # | Description |
00032521 | Occasional wrong trim of group of stirrups along openings fixed |
00033292 | The divergence of non-linear calculation when wire fabric reinforcement is applied was solved |
Member | |
Case # | Description |
00032740 | The issue with bolts solved |
RCS | |
Case # | Description |
00032506 | The possibility of generating MNK diagram in both strong and weak directions for a cross-section in RCS has been fixed |
00032784 | Displaying of the cross-section with more parts in the second phase is correct now |