Released Jun 1, 2023
| All applications | |
| Case # | Description |
| 00034579 | The issue with the incorrect comparison of Fu and Fy in material properties |
| 00035892 | The issue with the deletion of custom materials in the MPRL editor is fixed |
| 00036701 | The fillet welds generation between the web and flanges in the I profile shear lug is fixed |
| Beam | |
| Case # | Description |
| 00036483 | Fixed issue in reduced report generation. Now it is possible to switch off internal forces |
| 00036573 | The information about deflections for composite sections was rewritten |
| BIM links | |
| Case # | Description |
| 00032347 | Fixed wrong export of cross-section in STAAD.Pro |
| 00034272 | Exporting the complicated composite section from Beam to Detailhe will not fail anymore |
| 00035261 | Fixed incorrect export of force and moment components when a combination contains the same load case twice in STAAD.Pro |
| 00035546 | The issue with the wrong buckling factor for rod members has been fixed |
| 00035563 | The issue with the import of the 2U cross-section from RSTAB has been fixed |
| 00035697 | The issue with Tekla export is solved |
| 00035911 | Corrected issue with data import from RFEM |
| 00036009 | Fix of transfer of load combinations from RFEM |
| 00036120 | Corrected member cross-section orientation after export from STAAD.Pro to Member |
| Connection | |
| Case # | Description |
| 00034581 | Influence of shear force when using rod cross-section corrected |
| 00035026 | The coefficient for filler plates in the Australian Code corrected |
| 00035124 | The assigning of the negative volume was fixed |
| 00035311 | Corrected weld constraints for symmetrical beam-to-beam end plate connection to give symmetrical results in weld stress |
| 00035669 | The issue with .dxf is solved |
| 00035741 | The issue with disconnected plates of the U profile has been fixed |
| 00035750 | Load extreme selection functionality has been extended by one condition comparing stresses in members |
| 00035808 | An issue with missing templates in Connection Library due to cloud storage temporary error has been fixed |
| 00035829 | Operation Connecting plate when rod cross-section used was corrected |
| 00035927 | The issue with empty section views has been fixed |
| 00035933 | Several meshing issues have been identified and fixed |
| 00035950 | The issue with missing fillet welds after import from Advance Steel has been fixed |
| 00035970 | Partial safety factors for both welds and bolts in fire design are now available |
| 00035997 | The issue with identical names of loads corrected |
| 00036034 | The situation about buckling analysis and negative values was fixed |
| 00036095 | Fix of an error when generating a report |
| 00036111 | The issue with meshing around the bolt opening solved |
| 00036122 | The issue with missing welds of the welded section has been fixed |
| 00036128 | Mesh generation error - fix of a cut with an offset |
| 00036163 | The issue with mesh generating was fixed |
| 00036199 | Warning for incorrect input of geometry added |
| 00036209 | Welds no longer disappear when Y or Z eccentricity exceeds 1 mm |
| 00036226 | A bug in the Report generation was fixed |
| 00036242 | The issue with the discontinuity of welded cross-sections was fixed |
| 00036260 | Fixed blank report page |
| 00036324 | There was an issue regarding welded compound sections and eccentricities that has now been fixed |
| 00036327 | An issue with partially missing welds of a general welded section when setting an eccentricity of a member has been fixed |
| 00036433 | The weld size now includes intervals of 1/16 inch when using imperial units |
| 00036476 | The cut operation applied on Stub operation and circular sections was fixed |
| 00036509 | The issue with the error in the report is solved |
| 00036540 | Section model views fixed |
| 00036637 | Workaround is provided for issues with support in image in a report |
| Detail | |
| Case # | Description |
| 00035523 | The calculation issue of the model in the general position was fixed |
| Member | |
| Case # | Description |
| 00035104 | Corrected issue with meshing in the anchoring operation |
| RCS | |
| Case # | Description |
| 00034663 | The issue with the nonconformity message for the crack width check in Dutch is solved |
| 00034933 | The issue with minimum reinforcement in RCS is solved |
| 00035481 | The issue regarding shear force capacity in RCS is solved |
| 00035495 | The issue with art 6.1(9) from the Dutch national annex has been solved |
| 00035765 | The issue with the order of sections in the report in RCS is solved |
| 00036495 | Fixed shear and torsion interaction for zero torsion or zero shear cases |
| 00036620 | The wrong identification of shear reinforcement in the 2D section interaction check was fixed |