Tudásbázis

Export of an IFC file from IDEA StatiCa Connection

Steel

Connection

BIM link

Drawing

v23.1

Ez a cikk a következő nyelveken is elérhető

The Industry Foundation Classes (IFC) format is an open data, vendor-neutral format that enables the sharing of CAD data. This offers users the ability to share a connection design in a format readable by other BIM software.

One IFC model is more than a dozen drawings

As a detailer, modeling a complex, or even simple, connection design according to 2D drawings provided by a structural engineer can get complicated and create room for error. Therefore, it is important to share as much information between the professions as possible. So, why not use a format that is recognized by every BIM software tool of the industry? An IFC provides you with a 3D representation of the connection, which can be linked to Tekla, Revit, etc., and IFC viewers.

How to export your connection design into IFC

All it takes is one click!

Design your steel joint in IDEA StatiCa Connection and navigate to the Report tab.
Click on the IFC export icon, and it's done!

You can export connections into IFC even if you don't use the desktop application!

Just upload the steel joint to our web application IDEA Statica Viewer.
Click on the icon of IFC file and IFC of your joint will be automatically downloaded.

The IFC file includes:

A geometrically accurate model of the connection, including bolts and welds.
Basic information about cross-sections, bolts, welds, and materials.
The model defined as an IFC2x3 coordination view

A visual representation of a connection

The IFC file can be imported to BIM/CAD tools (such as Tekla Structures, Autodesk Revit, etc.) as a visual representation of the connection model. This provides the detailer with a better understanding of the model. Opening the model in any IFC viewer software brings you a wholesome view and the possibility to create additional section views, cuts, and measurements.

IFC export improvements (since version 23.1.1)

Here you can find listed improvements and details about the IFC export in 23.1.1 patch:

Supported and verified Viewers:

BIMvision 2.27.3 and later
Solibri 9.13.5.12 and later
Autodesk Viewer (https://viewer.autodesk.com/)

Information about Cross sections and Materials

Information about cross section and materials are contained in custom properties ("IDEA_CrossSection", "IDEA_MaterialSteel*" property sets).

Improved Openings, Notch-cutting

Notches and Openings operations are supported fully for IFC export and are visualized correctly in IFC viewers (Solibri, BIMvision, and Autodesk viewer checked)

Negative volumes primarily export to IFC

Negative Volumes with limitations
- In IDEA 23.1.1 added support for "Type" member Limitation - mirroring is not supported (planned for next iteration)
- In IDEA 23.1.1 added support for "Type" plate Limitation - negative plate is exported to IFC and has to be disabled in IFC viewer (planned for next iteration)

Improved bolt positioning during export

Improved IFC export of circular connection plates with unequal meshing

Circular plates are exported correctly to the IFC

Validated IFC Syntax and Schema of IFC 2x3 by BuildingSmart validation tool

https://validate.buildingsmart.org/ (note: referencing rules are not satisfied on purpose - referencing welds to multiple edges)

Rods can be exported to IFC from IDEA Statica

Rods are supported for IFC export

Improved positioning of welds

Welds are placed on the right edges according to the Connection model

Known limitations

IFC export from IDEA StatiCa Connection app and Viewer is optimized to export 3D geometry with parameters about materials and cross sections of contained objects.

Some software supports importing IFC objects and can even convert IFC objects to native design objects. We want to support this opportunity as much as possible but can’t optimize it for all.

Here, you can see the status of optimization for the following software:

Tekla Structures 2022, 2023