Wissensdatenbank
Detaillierung von Schrauben und Schweißnähten nach chinesischer Norm
Schrauben
Der minimal zulässige Abstand der Schrauben wird gemäß Tabelle 11.5.2 überprüft.
Minimal zulässiger Abstand der Schrauben; d0 – Schraubenlochduchmesser
| Minimal zulässiger Abstand | |
| Schraubenabstand | \( 3 \cdot d_0 \) |
| Randabstand parallel zur Last | \( 2 \cdot d_0 \) |
| Randabstand senkrecht zur Last (Lochleibungsschraube) | \( 1.2 \cdot d_0 \) |
| Randabstand senkrecht zur Last (vorgespannte Schraube) | \( 1.5 \cdot d_0 \) |
Schweißnähte
Die minimale Schweißnahtgröße hf wird gemäß Tabelle 11.3.5 überprüft. Die Schweißnahtgröße wird aus der Schweißnahtdicke bestimmt: \( h_f = \sqrt{2} \cdot h_e \).
Minimale Schweißnahtgröße hf
| Blechdicke [mm] | Minimale Schweißnahtgröße [mm] |
| \( t \le 6 \) | 3 |
| \( 6 < t \le 12 \) | 5 |
| \( 12 < t \le 20 \) | 6 |
| \( 20<t \) | 8 |